Designs a pump by selection of at the beginning of and end nodes in the drawing.

• Mode – In addition to the modes specified under the common function adjustments (see Function Adjustments), the following possibilities are available for the pump construction:
  • From the return to the advance – Creates the pump between advance and return, with start nodes in the return. In this mode is enough the selection nodes, in order to create the pump. In long-distance heating three-conductor networks must be selected as link nodes of the advance or KLB nodes.
  • From the advance to the return – Creates the pump between advance and return, with start nodes in the advance. In this mode is enough the selection nodes, in order to create the pump. In long-distance heating three-conductor networks must be selected as link nodes of the advance or KLB nodes.

➤ In order to create a new pump, carry out the following steps:

1. Click Create Pump (sisHYD > Tools > Construction).
2. Click on the initial nodes of the pump.
   
3. Move the mouse cursor to the end node. The pump symbol is displayed under the mouse cursor.
4. Click on the end nodes of the pump.
   

See configuration dialog Pumps.